Texilac Devore 5kg and Activator 1Kg
TEXILAC DEVORE Bi-component water-based ink for textile devoré printing. Direct textile printing. For ready-to-wear and pre-cut articles.
Bi-component ink. Texilac Devoré must be mixed with 10-20% Texilac Devoré Attivatore. Mix well, before using it. The quantity of Texilac Devoré Attivatore may vary, depending on:
- The composition of the mixture polyester/cotton: high cotton percentages require higher quantities of activator
- The kind and thickness of the fabric: the higher is the thickness, the higher must be the quantity of activator.
The mixture pot-life is about 8 hours. This duration may vary depending on the printing environmental conditions: high temperature and humidity may reduce it. Always check that the substrate is a mixed polyester/cotton fibre.
(60007)
TEXILAC DEVORE Bi-component water-based ink for textile devoré printing. Direct textile printing. For ready-to-wear and pre-cut articles.
Bi-component ink. Texilac Devoré must be mixed with 10-20% Texilac Devoré Attivatore. Mix well, before using it. The quantity of Texilac Devoré Attivatore may vary, depending on:
- The composition of the mixture polyester/cotton: high cotton percentages require higher quantities of activator
- The kind and thickness of the fabric: the higher is the thickness, the higher must be the quantity of activator.
The mixture pot-life is about 8 hours. This duration may vary depending on the printing environmental conditions: high temperature and humidity may reduce it. Always check that the substrate is a mixed polyester/cotton fibre.
